Low MOQ for Professional Motocross Goggle Glasses For Helmet Mask Protective Gear,CS Sport ,Paintball Game to Vietnam Factory
Quick Details Place of Origin: Guangdong China (Mainland) Model Number: CG07 Frame Material: Plastic Usage: Ski Lenses Material: PC Color: Orange , red , white , blue , green etc Approval: CE Size: One size fitting for Adult Fitting: Motorcycle Helmet ,Downhill Sport Helmet ,CS Sport ,Paintball Goggle Professional Motocross Goggle Glasses For Helmet Mask Protective Gear,CS Sport ,Paintball Game Details : 1. Color : Orange , Blue , Green ,White , Re...
We support our buyers with ideal high quality products and high level service. Becoming the specialist manufacturer in this sector, we have gained rich practical experience in producing and managing for Low MOQ for Professional Motocross Goggle Glasses For Helmet Mask Protective Gear,CS Sport ,Paintball Game to Vietnam Factory, "Quality first, Price lowest, Service best" is the spirit of our company. We sincerely welcome you to visit our company and negotiate mutual business!
|Place of Origin:||
Guangdong China (Mainland)
Orange , red , white , blue , green etc
One size fitting for Adult
Motorcycle Helmet ,Downhill Sport Helmet ,CS Sport ,Paintball Goggle
Professional Motocross Goggle Glasses For Helmet Mask Protective Gear,CS Sport ,Paintball Game
1. Color : Orange , Blue , Green ,White , Red etc
2. Lens: Rainbow lens or transparent color
3. Goggle Frame : PU Material
4 . Goggle Strap: Three layer anti-slip Cyclegear Brand Strap
5 . Three layers Goggle Foam
Wecome to OEM or ODM Service !
|Selling Units:||Single item|
|Single package size:||30X30X30 cm|
|Single gross weight:||0.3 KG|
|Package Type:||50 pcs packed in one mater carton , 1 pcs packed in one retail box .|
Ballcock Supply Valve Repair = http://youtu.be/Pvj9QJDy1MQ?hd=1
Ballcock Supply Valve Part Overview = http://youtu.be/vEZMFf4mOH8?hd=1
To view the Ballcock Supply Valve Playlist = http://www.youtube.com/view_play_list?p=AE976779F4DFE50E
Replacing the Ball-Cock
A toilet’s water level is controlled by the Ball-Cock supply valve and float ball. This assembly will need to be repaired or replaced if the Ball-Cock supply valve is corroded, the float rod is bent or broken, and or if the float ball is no longer buoyant. Since the Ball-Cock supply valve is an older design and takes up more room in the tank, it should when replaced, be with a new toilet fill valve system. However, if a fill valve is not available, a new Ball-Cock supply valve assembly can be installed.
Purchase a Ball-Cock supply valve at a hardware, or plumbing supply store. This kit should include the valve assembly with float ball, connecting rod, and plastic fill tube. Additionally, a small bin to collect excess water will be needed when the old Ball-Cock supply valve is removed.
The tools needed to perform this repair are a pair of rib-joint pliers, an adjustable open-ended wrench, and a flat-head screwdriver.
Begin the replacement of the Ball-cock supply valve and Float Ball by turning off the water supply valve. Then remove the tank’s lid and flushing the toilet. With the tank empty, position a plastic bin to collect water under the Ball-Cock supply valve’s shank. Unscrew the hose from the base of the tank, having any water drain into the plastic bin below. Now with the open-ended adjustable wrench or rib-joint pliers unscrew the lock nut located on the bottom of the Ball-Cock supply valve’s shank. With the nut removed the entire assembly can be pulled out of the tank. The old assembly should be placed into the bin as it may continue to drain water.
With the old assembly removed, take the new Ball-Cock Supply valve and slide the tank gasket fully onto the shank. Then adjust the height to best suit the height of the tank usually about 1/2 inch below the edge of the tank and aligned with the overflow tube. Insert the threaded end into the hole where the previously assembly was removed. Position the new assembly and thread the lock nut by hand securing the tube upright. Once hand-tight secure the lock nut a 1/4 turn further with a wrench to insure a watertight seal. Now re-attach the water supply hose to the Ball-Cock Supply Valve’s shank below the tank. Then connect the fill hose to the top of the Ball-Cock Supply valve and attach it to the overflow tube. Once in place turn on the water-supply valve and the tank will begin to fill. Make any adjustments to the water level by twisting the screw at the top of the ball-cock assembly. The tank’s water level is best at about 1 inch below the top of overflow tube located in the center of the toilet. Inspect the new connections to make sure they are not leaking water and test the toilet’s function. Once in order replace the tank’s lid to complete the project.